Removing And Reinstalling The Software - Lexmark 2200 Series Manual

Installation appears incomplete
Windows users:
1
Right-click the My Computer icon.
Windows XP users, click Start to access the My Computer icon.
2
Click Properties.
3
Select the Hardware tab, and then click the Device Manager button.
4
Look for the Other Devices category. If there are any Lexmark devices shown here,
highlight them, and then press the Delete key.
Note: The Other Devices category displays only when unknown devices are
present. Do not delete any Lexmark items unless they are present
under the Other Devices category.
5
Insert the CD, and install the software again. Do not restart the computer. For help,
refer to the setup documentation.

Removing and reinstalling the software

If the All-In-One is not functioning properly or if a communications error message appears
when you try to use your All-In-One, remove and then reinstall the All-In-One software.
Windows:
1
From your desktop, click Start
Uninstall.
2
Follow the instructions on your screen to remove the All-In-One software.
3
Restart your computer before reinstalling the All-In-One software.
4
Insert the CD, and then follow the instructions on your screen to install the software.
Mac OS X:
1
From your desktop, double-click the Lexmark 2200 Series folder.
2
Double-click the Lexmark 2200 Series Uninstaller icon.
3
Complete the user authentication notice, and then click OK.
4
Click Uninstall, and then click OK.
Programs Lexmark 2200 Series
8