Lexmark 2200 Series Installation Manual

2200 Series All-In-One
Safety information
• Use only the power supply provided with this product or the
manufacturer's authorized replacement power supply.
• Connect the power supply cord to an electrical outlet that is
near the product and easily accessible.
• Refer service or repairs, other than those described in the
user documentation, to a professional service person.
CAUTION: Do not use the fax feature during a lightning
storm. Do not set up this product or make any electrical
or cabling connections, such as the power supply cord or
telephone, during a lightning storm.
For more help:
1 Refer to your User's Guide.
2 Visit our Web site.
http://support.lexmark.com/
3 Call us at (800) 332-4120.
Monday - Friday (9:00 AM - 9:00 PM EST)
Saturday (Noon - 6:00 PM EST)
Phone number and support times may change without notice.
4
Raise the paper support and
extend the paper exit tray.
21T0070
P/N 21T0070 EC 21T004
©
2003 Lexmark International, Inc. All rights reserved.
1
Unpack your All-In-One.
May not be included
5
Lift the scanner unit.
www.lexmark.com
2
Connect the power supply cord.
1
Remove the sticker and tape
6
from the print cartridge(s).
1
2
3
Make sure the power light is on.
2
7
Insert the cartridge(s) and snap the lid(s) closed.
Left Right
1
2
3
4