Cooking Tips; Cleaning And Maintenance - Russell Hobbs RHFP05 Instructions And Warranty

4. DO NOT place the thermostat control/ probe on the pan surface. It may scratch or damage the
finish.
5. DO NOT wash the pan with the thermostat control/ probe connected.
6. Wash the pan after each use to avoid stains caused by a build-up of food or grease residues.
Never leave food in the pan overnight.
7. Hold the unit at a 45° angle, socket side facing upwards so as to wash. This will prevent or at-
least minimize the likelihood of water getting into the socket.

COOKING TIPS


Foods which overcook easily should be removed from the roaster as soon as cooking has been
completed.

Try to dry meat, fish, poultry, etc. before adding to hot oil to prevent unnecessary splattering.

Do not fry too much food at a time in order to prevent the oil temperature from dropping too
dramatically.

CLEANING AND MAINTENANCE


This appliance is for household use only and is not user-serviceable.

Do not open or change any parts by yourself. Please refer to a qualified electrical service
department or return to the supplier if servicing is necessary.

Always remember to unplug the unit from the electrical outlet when not in use and before
cleaning. Ensure that the temperature dial is set to the "OFF" or "0" position.

Always unplug the thermostat control/ probe from the unit before cleaning. Remove the
thermostat control/ probe by gripping the control on either side firmly and pulling. Do not pull on
the cord to remove the thermostat control/ probe from the pan.
Never allow the thermostat control/ probe to come into contact with any liquid. To clean the
thermostat control/ probe, gently wipe it with a soft dry cloth or paper towel. Always ensure that
the probe is completely dry before inserting it into the socket of the pan.

Clean the body of the roaster while it is still warm after use. Be careful as it may still be hot.
Clean when the roaster is comfortable to the touch. The roaster should be cleaned with a damp
7