Lens; Exposure - CCTV Center AP-C4323ART User Manual

Super high resolution wdr camera
Table of Contents

Advertisement

OSD Instruction
2) LENS : Select Lens Type
1. DC IRIS
: Select this mode when DC Auto Iris lens is used.
- Press the joystick S/W to enter the sub menu. The brightness can be adjusted
2. Manual
: Select this mode when Manual Lens is used.

3) Exposure

- Select "Exposure" by using Joystick S/W with Up / Down Direction.
- Press " Set Button" to enter "Exposure Setup"
1. AGC (Auto Gain Control)
The higher gain level, the brighter pictures, but the higher noise.
- Off
: Deactivate AGC function
- Low / Middle / High : Set the desired AGC Level.
2. Shutter : Auto / Manual Shutter can be selectable
- A. FLK
: Select this when picture flickering. The picture flickering can be caused
by a clash with the frequency of the installed lighting.
- ESC
: Select this to control the shutter speed automatically. In terms of ESC,
the shutter speed is automatically controlled depending on the ambient
illumination of the subject.
- Manual
: You can control shutter speed manually from 1/160~1/90000
Also control from X2 ~ X512.
:
p
7
SUPER HIGH RESOLUTION WDR CAMERA
y
/
/

Advertisement

Table of Contents
loading

Table of Contents