Table of Contents
Advertisement
OSD Instruction
9) SPECIAL
6. Monitor Type
- Change the setting value of video appropriate to your monitor.
- LCD / CRT Monitor types are selectable.
7. FACTORY RESET
7. FACTORY RESET
- Go back to Factory Defaults for all setting values of OSD.
8. COMM SET (Communication Setting)
- To set up the camera communication status when controlling the camera with
external control device.
1. PROTOCOL : Pelco D protocol is supported as default.
2. Camera ID : You can give Camera ID from 0~255 with your desired position.
3. BAUD RATE : You can select Baud Rate from 4800 ~ 57600.
4. SAVE / REBOOT : In order to activate this function, save your desired setting value
5. Previous : Go back to "Main Menu".
9. EXIT
- Press Set Button in the EXIT menu to save the current settings and exit Main Menu.
and reboot the camera in order.
15
SUPER HIGH RESOLUTION WDR CAMERA
Advertisement
Table of Contents
