Wdr / Blc / Eclps - CCTV Center AP-C4323ART User Manual

OSD Instruction
4) DAY / NIGHT
- Color : The picture is always displayed in color.
- B/W : The picture is always displayed in Black and White. You can turn on or off
the burst signal on B/W mode.
- Auto : The mode is switched to Color in a normal environment, but switched to
B/W mode when ambient illumination is low. To set up the switching time or
speed for Auto mode, press "Set Button". You can turn on or off the burst
signal on B/W mode. Filter Delay is to dwelling time to convert Color to B/W
- External : This mode allows you to apply a desired filter to External signals.
√ Remark : Day / Night will not be activated when AGC in the EXPOSURE menu is OFF.

) 5) WDR / BLC / ECLPS

1. WDR (Wide Dynamic Range)
WDR illuminates darker areas of an image while retaining the same light level for
brighter areas to even out the overall brightness of images with high contrast between
bright and dark areas.
- Low / Middle / High : Select your desired mode Low / Middle / High : Select your desired mode
2. BLC (Back Light Compensation)
- It delivers a distinctive subject and background at the same time, even when
the subject is in backlight, unlike conventional cameras, by adopting a proprietary
DSP chip.
- Low / Middle / High : Select your desired mode
SUPER HIGH RESOLUTION WDR CAMERA
WDR ON
BLC ON
9
WDR OFF
BLC OFF