Camera Name - CCTV Center AP-C4323ART User Manual

1. Press the set button to access "Main Setup" mode of OSD.
2. Select the desired feature by using Joystick S/W with Up / Down direction.
3. Change the status of the selected feature by using Joystick S/W with Left / Right direction.
4.When you finish the camera setup, put the arrow indicator to "Exit" and press "Joystick S/W"
* Remark : " Remark : " indicates Sub-Menu existing. Press "Set Button" to access "Sub-Menu". indicates Sub Menu existing. Press Set Button to access Sub Menu .
•Select the function
by using Joystick
S/W with Up /
Down direction.
1) CAM NAME
- Entitle Camera Name (ID) and it will be appeared on the screen.
- Select CAM Name by using Joystick S/W with Up/Down direction
- Set it to ON by using Joystick S/W with Left / Right direction. Then press SET BUTTON.
√ Remark : If the CAM Name is OFF, no Name will be displayed on the monitor.
- Use Joystick S/W with 4 direction to select a desired letter and press "SET Button".
Repeat this process each by each. 15 letters can be edited.
- After entering the title, move the cursor to POS and press SET Button. Select the
position to display the title on the screen by using Joystick S/W with 4 direction .
Press SET Button. When the position is determined, select END and press SET Button
to return the SPECIAL Menu. t t th SPECIAL M
SUPER HIGH RESOLUTION WDR CAMERA
• Change the status by using
6
OSD Instruction
Joystick S/W with Left / Right
direction. di ti