Table of Contents
Advertisement
OSD Instruction
8) EFFECTS
2 . Image Freeze : To hold the image to analyze precisely.
3. D-Effect
: Change the video direction. Vertical Flip, Mirror, Rotate are supported.
4. Color
: Set the video mode color or B/W.
5. Contrast
: Adjust Contrast Level that you desired.
6. Sharpness : Adjust Sharpness Level. Increasing this value, the picture outline becomes
6. Sharpness : Adjust Sharpness Level. Increasing this value, the picture outline becomes
stronger and clear.
7. CR Gain
: Adjust "Red Color Portion" in the video
8. CB Gain
: Adjust "Blue Color Portion" in the Video
9. Initial Set : To return the default setting , which is defined in "EFFECT" Menu
10. Previous : Go back to "Main Menu".
√ Remark :
The picture may be distorted or noise may appear if SHARPNESS level is increased too high.
If the V-FLIP or MIRROR mode is enabled, the text on the screen does not flip.
9) SPECIAL
- Select "SPECIAL" by using Joystick S/W with Up / Down Direction.
- Press " Set Button" to enter "SPECIAL. " Select the desired mode for your purpose.
Press Set Button to enter SPECIAL. Select the desired mode for your purpose.
:
1. MOTION DET.
- Zone Number : Select MD area to activate. 8 Areas can be programmable.
- Zone STAT
- Width / Height : Set the size of MD
- Move X/Y
Move X/Y
- Sensitivity
- Initial Set
- Previous
A signal is generated by the camera whenever motion is detected.
: Determine MD area selected.
: Determine the coordinate of Horizontal / Vertical Axis for MD Position
: Determine the coordinate of Horizontal / Vertical Axis for MD Position
: 8 areas can be activated. When Sensitivity number is high, motion
detection sensitivity is increased to recognize even small movement.
: To return the default setting , which is defined in "Motion DET" Menu
: Go back to "Main Menu".
SUPER HIGH RESOLUTION WDR CAMERA
13
Advertisement
Table of Contents
