Troubleshooting - CCTV Center AP-C4323ART User Manual

TROUBLESHOOTING

TROUBLESHOOTING
If you have troubles in operating your camera, refer to the following table.
If this guidelines do not enable you to solve the problem, contact an authorized
technician.
PROBLEM PROBLEM
Nothing appears on
the screen
The image on the
screen is dim
The image on the
screen is dark.
The camera is not
working properly, and
the surface of the
camera is hot.
DAY/NIGHT menu
does not work
SENS-UP function does SENS UP function does
not work
Color is not correct
The screen flickers The screen flickers
continually
- Check the power cord and line connection between
the camera and the monitor are fixed properly.
- Check that you have properly connected VIDEO cable
to the camera VIDEO Output jack.
- Is lens stained with dirt? Clean your lens with soft, clean
cloth.
- Set the monitor to proper condition.
- If the camera is exposed to too strong light , change
the camera position.
- Adjust the lens focus properly Adjust the lens focus properly.
- Adjust the contrast feature of the monitor.
- If you have an intermediate device, set the 75Ω / Hi-z
properly.
- Check that you have properly connected the camera
to an appropriate power source.
- Check that AGC of EXPOSURE Setup menu is OFF.
- Check that AGC of EXPOSURE Setup menu is OFF.
- Check that Shutter of EXPOSURE Setup menu is A.FLK or
Manual
- Check the setting of WHITE BAL Setup menu.
- Check that direction of camera turns toward the sun
16
SUPER HIGH RESOLUTION WDR CAMERA
SOLUTION SOLUTION
Troubleshooting