and attach the cable end to the throttle lever on the
engine (Figure 6 and Figure 8).
1. Attach cable end here
2. Cable clamp
8. Adjust the throttle cable by doing the following:
A. Set the throttle control to the Fast position
(Figure 9).
B. Remove the air cleaner cover to see the throttle
on the engine more easily (Figure 10).
Figure 8
3. Throttle cable
Figure 9
C. Move the throttle lever on the engine until
the throttle lever just touches the choke lever
(Figure 11).
1. Set screw
2. Choke lever
D. Tighten the set screw (Figure 11).
E. Install the air cleaner cover.
9. Install the back cover with the two screws you
removed in step 2.
8
Figure 10
Figure 11
3. Throttle lever