Product Overview - Lawn-Boy 22270 Operator's Manual

Figure 14
2. Squeeze the button on the lever with your thumb
and fully insert the mulch plug into the opening
(Figure 14).
3. Release the button on the lever and ensure that the
top of the lever is lies fully in the switch channel. If
the top of the lever is not in the switch channel,
your mower will not start!
Note: If the lever does not latch properly,
disconnect the wire from the spark plug and check
for and remove any debris buildup in the tunnel.

Product Overview

1. Handle
2. Blade control bar
3. Self-propel drive bar
4. Fuel tank
5. Starter handle
1. Grass bag
2. Side discharge chute
10
Figure 15
6. Oil fill/dipstick
7. Air filter
8. Cutting height lever (4)
9. Spark plug
10. Throttle control lever
Figure 16
3. Mulch plug (installed)