Fire Sense 61445 Manual page 6

ASSEMBlY
3
Screw the two pieces of the Main Post
screw the Main Post onto the Lower Post.
4
Attach Head Assembly to Main Post.
Note: There is a small piece of protective foam located in the
neck of the Head Assembly that MUST be removed prior to
attaching Head Assembly to the Upper Post.
Route Gas Hose E down into assembled post and align 4
small holes on Head Assembly
F
Post . [Note: Control knob should be above decal on post.]
Insert an M6x12 Bolt w/ Lock Washer bolts into each of 4
holes and tighten.
Hardware Used:
Contact us for assistance: (866) 985-7877 | www.balkenehome.com
D together. Then
C
with 4 Small holes in Main
4 - M6x12 Bolt w/ Lock Washer
6