Download Print this page

Technical Specifications; Product Disposal - Nice BiDi-ZWave Instructions And Warnings For Installation And Use

Advertisement

10

TECHNICAL SPECIFICATIONS

The product IBT4ZWAVE is produced by Nice S.p.a. (TV). Warnings: - All technical specifications stated in this section refer to an ambient
temperature of 20°C (± 5°C) - Nice S.p.a. reserves the right to apply modifications to the product at any time when deemed necessary, while
maintaining the same functionalities and intended use.
IBT4ZWAVE
Type
Technology adopted
Power supply
Absorbed current
Radio frequencies
Internal antenna max. transmit power
External antenna max. peak gain
External antenna cable length
Antenna connector screws rated torque
Casing protection rating
Operating temperature
Dimensions (mm)
Weight
11

PRODUCT DISPOSAL

This product is an integral part of the automation and therefore must be disposed together with the latter.
As in installation, also at the end of product lifetime, the disassembly and scrapping operations must be performed by qualified personnel. This
product is made of various types of material, some of which can be recycled while others must be scrapped. Seek information on the recycling
and disposal systems envisaged by the local regulations in your area for this product category.
Caution! – some parts of the product may contain pollutant or hazardous substances which, if disposed of into the environment,
may cause serious damage to the environment or physical health.
As indicated by the symbol alongside, disposal of this product in domestic waste is strictly prohibited. Separate the waste into
categories for disposal, according to the methods envisaged by current legislation in your area, or return the product to the retailer
when purchasing a new version.
Caution! – local legislation may envisage serious fines in the event of abusive disposal of this product.
control using Z-Wave network of devices fitted with connector compatible with BUS T4
half duplex 19200 Bps serial connection on differential bus
24V
supplied by the control unit to which the BiDi-ZWave is connected
868.0–868.6; 869.7–870.0 MHz
IP 40 (use indoors or in protected environments only)
max 50 mA
10 dBm
3 dBi
1 ... 3 m
0.4 Nm
- 20 °C ... +50 °C
37 x 28 x h 21
10g

Advertisement

loading

This manual is also suitable for:

Ibt4zwave