Phonak Roger TableMic II How To Connect

How to Connect with
Roger TableMic II
1

General Operation

To switch on, press the On/Off button on the side of the Roger
•
TableMic II until the indicator light turns green. Figure 1
To connect, hold your Roger TableMic II close (within
•
10 cm/4 inches) from the Roger receiver.
Press the connect button on your Roger TableMic II. Figure 2
•
To switch off, press the On/Off button on the
•
side of the Roger TableMic II for 3 seconds.
When charging with the supplied USB power cord,
•
the indicator lights will flash green. When fully
charged you will see a solid green light.
4
3
2
5

Device Description

1.
On/Off/ Mute
2.
Microphones and indicator light
3.
Audio input
4.
Charging input
5.
Connect
Figure 1
1s
Figure 2