Table of Contents
Advertisement
Identifying the
Logical Drives
Using Software
Depending on the model, either a fixed disk drive, or
removable IC cards with non-volatile memory are
used as internal mass storage device.
The interface board for connecting IC cards may also
hold non-volatile memory. The system will address
this memory as a logical drive, similar to a fixed
disk. This drive is referred to as the flash disk.
The extension unit may provide external flexible and
fixed disk drives.
You may also connect an external flexible disk drive
via the option board slot.
The following table lists which logical drive number
(letter) is allocated for the different storage device
combinations. If the IC card interface has no
on-board memory, the logical drive listed for "flash
disk" is not available.
System 3125 User's Manual
Using the System
Using Software
3.1
Advertisement
Table of Contents
