Table of Contents
Advertisement
Installing Options
Installing Upgrade Memory
6.4
Installing
Upgrade Memory
Memory upgrade cards with 4 MB are optionally
available. You can install memory upgrade cards only
to models with 4 MB of standard system memory.
Perform the following steps to install a memory
upgrade card to the system.
1 Open the flap of the stylus compartment.
2 With the label on the memory upgrade card
facing up and the connector pointing into the
computer, insert the memory upgrade card into
the memory card slot.
3 Push the memory upgrade card in until it is
securely plugged into the memory card receptacle
of the system.
The next time you switch on the computer, the
4
power-on routine will automatically recognize the
newly installed memory as extended memory.
Refer to "Memory Management" in the chapter
"Using the System" to decide on a more
sophisticated use of the memory.
Note: For using
again after installing upgrade memory to
ASVSETUP
reserve disk capacity for
new system RAM size.
System 3125 User's Manual
you must run
Auto Save
Auto Save
according to the
Advertisement
Table of Contents
