Husqvarna DS 700 Operator's Manual page 8

WARNING:
INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS BODILY INJURY.
DO read this entire operator's manual before operating this machine. Understand all warnings, instructions, and
controls.
DO wear safety approved hearing, eye, head and respiratory protection.
DO read and understand all warnings and instructions on the machine.
DO read and understand the symbol definitions contained in this manual.
DO keep all parts of your body away from the bit and all other moving parts.
DO always anchor the machine properly before drilling.
DO know how to stop the machine quickly in case of emergency.
DO read all safety materials and instructions that accompany any bit used with this machine.
DO inspect each bit and spindle carefully before using it. If there are any signs of damage or unusual wear, DO NOT
USE THE BIT!
DO mount the bit solidly and firmly, Wrench tighten the bit.
DO make sure the bit is clean and free of dirt and debris before mounting the bit on the machine.
DO use the correct bit for the type of work being done. Check with the bit manufacturer if you do not know if bit is
correct.
DO operate this machine only in well ventilated areas.
DO instruct bystanders on where to stand while the machine is in operation.
DO establish a training program for all operators of this machine.
DO clear the work area of unnecessary people. Never allow anyone to stand near the bit while the motor is running.
DO make sure the bit is not contacting anything before starting the motor.
DO use caution when lifting and transporting this machine.
DO use caution and follow instructions when setting up the machine.
DO have all service performed by competent service personnel.
DO always check for buried electrical cables before drilling. If unsure, contact the local utilities.
DO clean the machine after each day's use.
DO carefully maintain and clean for better and safer performance. Follow instructions for changing accessories. In-
spect tool cords periodically and, if damaged, have repaired by authorized service facility.
DO only drill as deep as the job specifications require.
DO always attach the motor ONLY after the machine is properly anchored to avoid tipping.
DO always give a copy of this manual to the equipment user. If you need extra copies, call TOLL FREE 1-800-288-
5040.

SAFETY INSTRUCTIONS
SAFETY FIRST!
WARNINGS
DO's AND DO NOT's
FAILURE TO COMPLY WITH THESE WARNINGS AND OPERATING
DO