Triumph Speed Triple S Manual page 4

Maintenance
Suspension Setting Chart - Speed Triple S
Warning
Make sure that the correct balance be-
tween front and rear suspension is
maintained.
Suspension imbalance could signifi-
cantly change handling characteristics
leading to loss of control and an acci-
dent.
Refer to the chart below for further in-
formation or consult your dealer.
The standard suspension settings provide a comfortable ride and good handling
characteristics for general, solo riding. The chart shows suggested settings for the
front and rear suspension.
LOADING
Solo Riding Road
Comfort
Track
Sport
Rider and Passenger
¹ Number of adjuster turns anticlockwise from the fully clockwise position.
² Number of maximum adjuster turns unless already fully screwed out.
Note:
• The Speed Triple S motorcycle is delivered from the factory with the suspension
set at the Road riding settings, as shown in the relevant suspension chart.
Note:
• These charts are only a guide. Setting requirements may vary for rider weight
and personal preferences. See the following pages for information regarding
suspension adjustment.
FRONT
Spring Pre- Rebound
Load¹ Damping¹
8 2.5
8 2.75²
8 1
8 1.5
8 1.5
Warning
Make sure that the adjusters are set
to the same setting on both forks.
Settings which vary from left to right
could significantly change handling
characteristics leading to loss of con-
trol and an accident.
REAR
Compression Rebound
Damping¹ Damping¹
2 2.5
3² 2.75²
0.5 0.75
1.5 1.5
1.5 1
Compression
Damping¹
2
3²
0.5
1.5
1