RELM RM Series Field Programming Manual page 7

4. While in the global menu, press the [A] key scroll forward through the menu items or
press the [B] key to scroll backwards through the menu items.
Table 2.2 shows the global settings that can be selected while in this mode. While in this mode,
use the [▲] and [▼] keys to view the options for the global setting. To save the setting, press
[A] or [B] before exiting Dealer Mode. When finished programming, cycle the power of the unit
to exit "dealer" mode and start "user" mode.
Function Function
No. Name
No Function
Monitor (Squelch)
Monitor (Normal)
Time-Out-Timer
1
1 - 4 Function
Keys "A",
Scan Group 1 (All)
"B", "C",
and "D"
N/A
N/A
N/A
Add/Del From Scan
List
Talk Around
Decode Signal
Encode Signal
Squelch Level
Band Width
Key Lock
Panel Display
Display Invert
Display Change
Emergency
Silent Emergency
Busy Channel
Lockout/Busy Tone
Lockout
Horn Alert
Memory Channel 1
Memory Channel 2
TX Power
1
The "x" used in the display column for Function number 1 – 4 refers to "A", "B", "C", or "D" function key.
Page 6
Option
(Factory defaults are
Left
highlighted) Char. Char.
PKYx NOP
PKYxMONS
PKYxMONN
PKYx TOT
PKYxSCN1
PKYxSCN2
PKYxSCN3
PKYxSCN4
PKYxSCSK
PKYx
PKYxDSIG
PKYxESIG
PKYx SQL
PKYx BW
PKYxLOCK
PKYxDSPE
PKYxDSPI
PKYxDSPA
PKYxEMER
PKYxSEMR
PKYxBCLO
PKYx
PKYxMCH1
PKYxMCH2
PKYxTPOW
Display
Right
No Operation.
When selected, it toggles the squelch "on" and
"off".
When selected, it will toggle to disable or enable
the tone decoder.
When selected, it will toggle the TOT function "on"
or "off".
When the key is selected, it will toggle the scan
function "on" or "off".
When selected, it will toggle the present channel
"in" or "out" of the scan list.
When selected, it will toggle the Talk Around
TA
function "on" and "off".
When selected, it will toggle the RX Decode
function "on" or "off".
When selected, it will toggle the TX Encode
function "on" or "off".
When selected, the [▲] and [▼] keys are used to
adjust the squelch level.
When selected, it will toggle the bandwidth mode
between "wide" and "narrow".
When selected, it will toggle the lock function "on"
or "off".
When selected, it toggles the display "on" or "off"
When selected, it toggles the channel or label
information of the display to be "inverted" or
"normal".
When selected, it toggles between, channel
number, channel label, and frequency.
When selected, the emergency signaling feature is
executed.
When selected, the silent emergency signaling
feature is executed.
If "BCLO" or "BTLO" is programmed on a channel
and when this key is selected, it will toggle the
busy channel feature "on" or "off".
HA When selected, it will set the horn alert feature.
When selected, it will toggle between "Memory
Channel 1" and the selected channel.
When selected, it will toggle between "Memory
Channel 1" and the selected channel.
When selected, it will toggle the TX Power
between "High" and "Low".
Remarks
RELM Communications