Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for RELM RMV8125
Summary of Contents for RELM RMV8125
-
Page 1: Instruction Manual
INSTRUCTION MANUAL RMV8125 VHF/UHF MOBILE RADIO... - Page 2 Memo： INSTRUCTION MANUAL RMV8125 VHF/UHF MOBILE RADIO MANDATORY SAFETY INSTRUCTIONSTO INSTALLERS AND USERS Use Only manufacturer or dealer supplied antennas. ● Antenna minimum safe distance: 108 cm ● Antennas used for this transmitter must not exceed an an- ● tenna gain of 3 dBi.
- Page 3 turer or radio dealer must not be mounted at a location such that during radio transmission, any person can come closer than the above indicated minimum safe distance to the an- tenna (i.e. 108cm). To comply with current FCC RF Exposure limitations, the ●...
-
Page 4: Table Of Contents
CONTENTS Note: The above information is applicable to EU countries 1. Package-opened Inspection and Installing......1 only. 2. Radio Overview..............3 3. Basic Operation..............6 ！ warning 4. Programmable Button Function..........7 5. Radio Call.................11 Maintain a separation distance from the antenna to person(s) 5.1. -
Page 5: Package-Opened Inspection And Installing
1. Package-opened Inspection and Installing Preparation 1.2.1 Connection of Power Cable Please check the radio in the package and the supplied acce- ＊ First of all, please check whether there is a hole for the ssories in the following table before using. Any articles are power cable on the insulating board. -
Page 6: Radio Overview
（3）LCD display screen ＊ Connect the antenna and the power cable to the radio. For details, see “LCD Display”. ＊ Install the microphone hanger at the position easy to use, with （4）Volume Control knob 2 M4*16 self-tapping screws. (The microphone and its cable sho- To be used to adjust volume. -
Page 7: Basic Operation
3．Basic Operation Display Description ① Startup: “H” means the transmission of signal for the Press the red POWER button for a long time (at least 1.5 seconds) radio at the high power; to switch the radio on/off Call Received indicator. ②... -
Page 8: Programmable Button Function
4． Programmable Button Function Buttons Function Description ， ， ， ， can be programmed as one of the auxiliary button to adjust the level. Press the button 10.Squelch Level Selection functions. to save the selected squelch level and quit this mode. -
Page 9: Radio Call
Buttons Function Description Buttons Function Description Press this button, the radio will enter the fast menu 28.Scan List Edit 18.Monitor/Call Press this button to trigger this function and the mode for scan list edit. For details, see “Menu CTCSS, DCS, and 2Tone/DTMF signaling will be Cancel Operation”. -
Page 10: Zone
Indicator will blink orange. Icon flashes and the caller’s ID or D. Press button until the zone name you require is appeared. name displays. E. Press button for selection. ②. Select the zone through “ZONE UP” or “ZONE DOWN”button. Press PPT button for callback. 5.3 Call Alert After the radio receives the call alert, the alert tone will sound and 7. -
Page 11: Scan
button until “UTILITY”. 9. Scan B. Press C. Press button for selection. In order to receive the calls from many channels, the radio can be D. Press button until the items you require are showed. programmed to scan these channels. At most there are 16 channels E. -
Page 12: Edit Scan List
9.3 Edit Scan List ⑨. Press button to return to the previous operation. 9.4 Add or Delete the Channels in the Scan List A. Press the “Menu Selection/Enter” button to enter the menu 10. OST mode. In a certain specific channel, you can revise the CTCSS/DCS button until “PROG LST”. -
Page 13: Trouble Shooting Guide
It will enter the user mode. Number Problem Solution ②. Connect the slave radio with the wired clone cable first, and then Phase lock A. The crystal X1 of phase lock loop is broken, turn on. please replace it. loop ③. -
Page 14: Major Specifications
Essential Test Suits measurement has been performed. 13. Major Specifications Frequency Range: 136MHz--174MHz 400MHz--450MHz Description of equipment: FM MOBILE Transceiver Model No.: RMV8125 438MHz--490MHz 470MHz--512MHz Channel Number: This compliance is based on conformity with the following harmonised standards or documents:...
Need help?
Do you have a question about the RMV8125 and is the answer not in the manual?
Questions and answers