USER MANUAL INDEX Important Safety Information Product Overview Product Features Product Structure Touch Control Panel And Remote Display Panel Before Use Product Unpacking Remote Battery Installation Positioning Operation Condition Use Your 2 in 1 Fan Heater Operation Method of Each Function Button 9-12 On/Off Mode Heating Mode Selection...
Important Safety Information Important Safety Information - Please don’t have the wind blow - Do not immerse the appliance Your Safety And Safety Of to the children directly for a or the electrical cord or plug in Others Is Very Important long time.
Important Safety Information - The 2 in 1 Fan Heater must not Electrical Warnings Child Safety be located immediately below a • Must be supplied with 220V • Do not place the appliance close socket outlet or other appliance. -240V~/50Hz. to children or pets.
Product Overview Product Features 1. 2 in 1 Fan Heater include fan and heating function, available in the whole year. 2. PTC ceramic heating element, change the power automatically based on the variation of the ambient temperature. No oxidation characteristics bring the product longer service life. 3.
Product Overview Product Structure Front View Side View Back View Warning Label: To avoid overheat, Do not cover the 2 in 1 Fan Heater. Top View 1. Remote control 7. Top cover receiver 8. Control panel 2. Wind outlet 9. Power cord 3.
Product Overview Touch Control Panel And Remote Display Panel Remote Display Panel Touch Control Panel / Display Panel Button Instructions ON/OFF button Power indicator. High / Low Fan mode button. Switch the fan mode, High/Low fan mode selection. High Fan mode indicator. When the lights on (Orange Light), the High Fan mode is activated. Low Fan mode indicator.
Before Use Product Unpacking • Unpack all the packaging materials • Carton box, foams, plastic bag, stickers must be removed. WARNING • Keep children away from the packaging since the folded packing and plastic bag may cause suffocation. • Check all accessories and documents. Please check the accessories inside the package according to packing list, contact the shop from which you purchased if anything is missing.
Before Use Positioning • Place the unit in an upright position • On a stable and flat surface. Carpet or futon is a very unstable place. Do not place above floor level such as on table. • Enough space around the unit. Recommended space: Side 90 cm or more; Filter side 90cm or more;...
Use Your 2 in 1 Fan Heater Operation Method of Each Function Button On/Off Mode WARNING WARNING Heat radiation function of fan: When the machine is on, the PTC heating element and the fan will work together. When the machine is off, PTC stops and fan will still operate for 10 seconds to lower the temperature of the PTC heating element.
Use Your 2 in 1 Fan Heater Heating Mode Selection Press button to set the mode, the mode is changed in sequence: Low Power, High Power Heating Mode. a) Low Heating Power: LED lights up. b) High Heating Power: LED lights up.
Use Your 2 in 1 Fan Heater Timer d) When you set the timer within 1-12 hour(s), the timer function will start (not show countdown number). After finished, the machine will stop and enter to Standby mode automatically. e) If the timer set to 0 hour, timer function off, the machine works at normal. f ) When both set the timer function and the desired temperature, display panel will show the timer and the room temperature respectively in every 30 seconds.
Use Your 2 in 1 Fan Heater Temperature Setting For Heating Mode Remark: Under below conditions: 1) First Time Use, or 2) User did not set the desire temperature in heating mode, or 3) User turns off the machine with the power switch (at the back of the machine). If the room temperature is higher than pre-set temperature (25℃).
Care and Maintenance Safety Warning & Safety Precautions In order to use the product more conveniently and avoid any danger caused by wrong operation, please pay close attention to the notices instructed by sign hereinafter. And then read the instructions carefully. •...
Care and Maintenance • Do not face the wind outlet to baby directly • Do not pull the wires when unplug the power for long time. Or it will be bad to baby’s cord plug, because it will damage the wire or health.
Care and Maintenance • Power off the device and unplug the power • Using the power outlet that meets the inspection cord when not using for a long time. requirements and the carrying capacity of the • Should avoid using the device, if there is any socket is no less than 13A/220V.
Don’t use the gasoline, thinner and other materials to clean the device which will damage the surface of the device. d) When storage, the heater should be firstly cold, dried, and packaged in dry and ventilated place. Product Specification Model No. FHT1200 Voltage 220-240Vac Frequency 50Hz Power...