Stopping An Import Job; Recreating An Import Job - Overland Storage SnapScale Administrator's Manual

SnapScale/RAINcloudOS 4.1 Administrator's Guide
2. Once you have completed the import information, click
You can see the progress of the import, the estimated time until completion, and the
import log on the secondary
3. When the import is complete, click
Import Error Log

Stopping an Import Job

To stop the import at any time, click
was in the process of being copied, the partially-copied file on the target is removed.

Recreating an Import Job

The Data Import
files and folders that were not imported during the original job due to an error condition (for
example, the file was locked).
1. Review the
locked file).
10400455-002
Option Description
Include All If the folder you select for import contains subfolders, selecting this
Sub-folders option imports all files and folders underneath this folder (default is
checked).
NOTE:
Overwrite Existing If any files/folders on the target have identical names with files/folders
Target Files & on the source, checking this option overwrites those files/folders
Folders during import (default is checked).
Preserve Selecting this option retains the source permissions when the
File/Folder files/folders are imported to the target (unchecked by default).
Permissions
NOTE:
Verify Imported Selecting this option causes all source data to be read twice, once to
Data write to the target and once to perform a binary comparison with the
data written (default is unchecked).
If enabled and, if the Import Type is Move, files on the source are only
removed after verification. Otherwise, files are removed during the
process of copying them to the target. If you select to move the files
rather than copy them, it is strongly recommended that you enable the
Verify Imported Data option.
If a file mismatch occurs during verification, the target file is moved to
a data_import_verify_failures directory on the root of the same
volume. Check the failed file to determine the problem, then run the
import again with Overwrite Existing Target Files & Folders deselected
(so you do not re-copy files that have already been copied and verified).
NOTE:
Email Notification Clicking the email notification link takes you to the Email Notification
page (for more information, see
Fill in notification information and check the box next to Administrative
Operation Event in order to receive an email when the import
operation is complete.
link to download the entire log.
log records all errors that occurred during import. You can import just the
errors log and correct all error conditions (such as unlocking a
Data Import
©2008-14 Overland Storage, Inc.
If disabled, only the files in this folder are imported.
Before selecting this option, review
page 212.
Depending upon how much data is being imported, verifying
imported data can be a lengthy process.
Email Notification on page
Data Import page.
View Log to see details of all errors. Click the
on the
Stop Import
8 - Maintenance
Preserving Permissions on
225).
to begin the import.
Start Import
secondary page. If a file
Data Import
Data
211
