Needle Threader; Left Needle - C-1; Center Needle - C-2; Right Needle - C-3 - Baby Lock Euphoria BLC4 Instruction And Reference Manual

Needle Threader

T
H
1. Open the front cover and front table.
R 2. Raise the presser foot to release all threads.
3. Set the threading lever from serging position to threading position.
E
4. Rotate the machine handwheel slowly toward you until the tube moves to connecting position (see
A
page 16).
5. Set the needle threader selector on "C1" (left needle) or "C2" (center needle) or "C3" (right needle)
D
(fig. A).
I
6. Press the needle threader lever down (fig. B and C) so that the hook goes into the eye of the needle.
The hook will remain in the eye of the needle.
N
7. Hold the needle thread horizontally with both hands and position the thread into the threader hook
G
guides on top of thread hook (illustration C for correct positioning).
8. Raise the needle threader lever up again (fig. D). The hook will pull the thread through the eye of
the needle as it is released.
9. Carefully remove the loop of thread from the needle threader hook and place the thread on top and
to the left of the presser foot.
Note: The Euphoria must be in the locked threading position when using the needle threader.
This is also a safety feature when threading the needles, as the machine cannot sew while in the
threading position.
Needle threader lever
C1 C2 C3
Needle threader selector
A
C
19
B
D