Blow-Sweeping; After Finishing Work; Transporting; Transporting The Blower - Stihl BGA 200 Instruction Manual

11 After Finishing Work

10.5 Blow-Sweeping

► Point the nozzle at the ground.
► Walk slowly and steadily forwards.
11 After Finishing Work
11.1 After Finishing Work
► Switch off the blower and pull the connecting cable plug
out of the socket.
► If the blower is wet: Allow the blower to dry.
► Clean the blower.

12 Transporting

12.1 Transporting the Blower

► Switch off the blower and pull the connecting cable plug
out of the socket.
► Carry the blower by the control handle.
► Transporting the blower in a vehicle: Secure the blower to
prevent turnover and movement.
0458-812-0121-A

13 Storing

13.1 Storing the Blower

► Switch off the blower and pull the connecting cable plug
out of the socket.
► Observe the following points when storing the blower:
– Blower must be out of the reach of children.
– Blower must be clean and dry.

14 Cleaning

14.1 Cleaning the Blower

► Switch off the blower and pull the connecting cable plug
out of the socket.
► Clean the blower with a damp cloth.
► Clean the intake screen with a soft brush.

15 Maintenance and Repairs

15.1 Maintenance Intervals

The maintenance intervals are dependent on the
environmental and operating conditions. STIHL
recommends the following maintenance intervals:
Every 12 months
► Have the blower checked by a STIHL servicing dealer.

15.2 Servicing and Repairing the Blower

The blower cannot be serviced or repaired by the user.
► If your blower has a malfunction or is damaged or requires
servicing: Contact your STIHL servicing dealer.
English
19