Raw Water Draining Locations - PCM DI Catanium CES Owner's Operation And Maintenance Manual

BLOCK EXHAUST EXHAUST
MANIFOLD CORNERS
WATER INLET CIRC PUMP
RAW WATER DRAIN PLUGS
A drain plug bracket/holder is mounted above the
alternator. This holder is designed to keep your
drain plugs organized and secure until they need to
be reinstalled. The drain plugs are BLUE for easy
identification. Some locations have BLUE hoses that
have the drain plugs located in the end of the hoses.
Each location is identified above.
ANODES
There are anodes in the exhaust manifolds. Refer to the ENGINE MAINTENANCE section of this manual for
proper locations and how to check them.

RAW WATER DRAINING LOCATIONS - 15

3
1 2
3
Figure 15-1 Raw Water CES 5.3L DI / 6.2L DI
V-DRIVE
SPARE
4
5
5
4
1 - Raw Water Inlet Manifold Hose Plug (1)
2 - Circulation Pump Hose Plug (1)
3 - Exhaust Manifold Plugs (2)
4 - Engine Block (2)
5 - Exhaust Corners (2)
6 - VDrive (1) / SPARE (Direct Drive)
SPARE (1)
VDrive Applications - 9 plug locations with 1
DDrive Applications - 8 plug locations with 2
L510010D-17
spare plug
spare plug
55
6