Table of Contents
Advertisement
READ ALL INSTRUCTIONS BEFORE USING
• Do not operate this lamp near a water source to avoid electrocution.
• Do NOT dismantle.
• Do not use with power supply voltage other than 120 VAC.
• Do not operate lamp in close proximity to flammable or combustible vapors,
such as aerosol spray products, or where oxygen is being administered.
• Do not cut or shorten the power cord.
• Close supervision is recommended when these lamps are used by or near
children, or others who may not understand the need for these precautions.
• To prevent risk of shock or personal injury when cleaning this lamp, make
sure you have turned off and unplugged the lamp and allowed sufficient time
for the bulb to cool.
• If this lamp has been damaged in any way, for example, the power supply
cord or plug has been damaged, liquid has been spilled or objects have fallen
onto the lamp, the lamp has been exposed to rain or moisture, the lamp does
not operate normally or has been dropped, it should not be operated. There
are no user serviceable parts in this lamp.
• Light bulbs get hot quickly! Do not touch the bulb while the lamp is on.
• Do not cut or shorten the power cord.
• This product contains a chemical known to the State of California to cause
birth defects or other reproductive harm.
• This bulb contains a trace amount of mercury. For more information on clean-
up and disposal, see www.epa.gov/cfl.
• For indoor use only.
• Avoid placing this lamp in areas that are exposed to direct sunlight or close to
heat radiating products such as heaters.
• Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles and the point where the power cord exits the
lamp.
• Always unplug lamp before performing bulb replacement or installation.
• This lamp is not for use with light dimmers, timers, motion detectors, voltage
transformers or extension cords.
VD01-Man-Rev16.indd 3
Important Safeguards
DANGER:
WARNING:
CAUTION:
3
6/5/13 3:26 PM
Advertisement
Table of Contents
