ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Before working on backhoe, extend boom and
dipperstick and place bucket on ground. Shut off the
tractor engine. Make sure that all system pressure
has been relieved by operating controls before per-
forming maintenance or service or before discon-
necting any hydraulic lines.
Keep all persons away from operator control
area while performing adjustments, service, or
maintenance.
Tighten all bolts, nuts, and screws to torque
chart specifications. Check that all cotter pins are
installed securely to ensure equipment is in a safe
condition before putting unit into service.
10 Safety
SAFETY RULES
Make sure all safety decals are installed.
Replace if damaged. (See Safety Decals section for
location.)
Make sure shields and guards are properly
installed and in good condition. Replace if damaged.
STORAGE
Block equipment securely for storage.
Keep children and bystanders away from stor-
age area.
Refer to Removing and Storing Backhoe in
Operation section of backhoe manual.
BH90-X_SR (Rev. 7/14/2006)