Mitsubishi Electric Mr.Slim MA Series Manual page 99

5. Weekly timer
• ON / OFF and temperature setting can be scheduled for each day.
• "Weekly timer" is not executed when the On / Off timer is enabled.
Button operation
[ 1 ]
Timer menu
Timer
Weekly timer
OU silent mode
Night setback
Main menu:
Cursor
[ 2 ]
Weekly timer 1
Mon Tue Wed Thu Fri Sat Sun
No.
Setting display:
day Page
F1 F2 F3
[ 3 ]
Weekly timer
Action No /1
Setting 1
Select:
Cursor
Weekly timer 1
[ 4 ]
Mon Tue Wed Thu Fri Sat Sun
No.
Setting display:
day Select
F1 F2 F3
Select "Weekly timer" from the Timer menu , and press the SELECT
ton.
The Weekly timer will not work in the following cases:
when the On / Off timer is enabled, when the weekly timer is disabled, during
an error, during check (in the service menu), during test run, during remote
controller diagnosis, when the clock is not set, during Function setting, when
the system is centrally controlled (On / Off operation or temperature setting
from local controller is prohibited).
The current settings will appear.
Press the F1 or F2 button to see the settings for each day of the week.
Press the F3 button to see patterns 5 through 8.
Press the F4 button to display the status of setting2.
2
F4
Press the SELECT button to go to the setting screen.
The weekly timer settings screen will appear.
/2
In the "Action" setting, select "1" to enable the timer
/2
setting 1, or select "2" to enable the timer setting 2
with the F3 or F4 button. Then, press the SELECT button.
Cursor
To check the setting contents of the timer setting 1 or2, move the cursor
to "Setting" with the F1 or F2 button, and select "1" or "2" with the
F3 or F4 button
The weekly timer setting screen will appear and the current settings will be
displayed.
Up to eight operation patterns can be set for each day.
Move the cursor to the desired day of the week with the F1 or F2 button,
and press the F3 button to select it. (Multiple days can be selected.)
Page
Press the SELECT button.
F4
MA REMOTE CONTROLLER
P
D-99
but-