Fujitsu ETERNUS AX Series Installation And Cabling Manual page 51

Table 13:
Feature release date
January 2017
Table 14:
Feature release date
October 2016
Feature updates
• Updated content as needed to support the DS460C disk shelf:
• Procedure for "Installing and cabling disk shelves with IOM12
modules for a new system installation"
• Procedure for "Hot-adding disk shelves with IOM12 modules"
• Title of this document: Installation and Cabling Guide for DS460C,
DS224C, and DS212C
Note: Although cabling illustrations show disk shelves with the IOM12
modules arranged side-by-side as in a DS224C or DS212C disk shelf, the
illustrations can be applied to configurations with DS460C disk shelves.
• Updated the "Considerations for installing and cabling disk shelves with
IOM12 modules for a new system installation" section to explain that
disk shelves are shipped with shelf IDs preset to 00, the exception to
this rule, and how to identify boxes containing disk shelves with the
root aggregates.
• Updated the "Cabling disk shelves with IOM12 modules for a new
system installation" section to include instructions for automatically
assigning shelf IDs in an HA pair or single-controller configuration.
• Updated the "Cabling disk shelves with IOM12 modules for a new
system installation", "Installing a disk shelf with IOM12 modules for a
hot-add", and "Changing the disk shelf ID" sections to state a valid shelf
ID is 00-99 (00 is not reserved for the internal disk shelf).
• Added the new "Controller-to-stack cabling worksheet template for
quad-pathed connectivity" section.
• Added the new "How to read a worksheet to cable controller-to-stack
connections for quad-pathed connectivity" section.
• Updated the "Controller-to-stack cabling worksheet template for
multipathed connectivity" title and section to broaden the context to
include cabling for an entire HA pair or single-controller configuration,
or individual stacks.
• Updated the "How to read a worksheet to cable controller-to-stack
connections for multipathed connectivity" title and section to broaden
the context to include cabling for an entire HA pair or single-controller
configuration, or individual stacks. And to correct an erroneous port
used in step 2c and step 2d.
• Updated the "Requirements for hot-adding disk shelves with IOM12
modules" section to specify that only IOM12 connections to 6Gb SAS
HBAs are negotiated down to 6Gbs.
IOM12 connections to 12Gb SAS HBAs operate at 12Gbs and IOM12
connections to 6Gb SAS HBAs operate at 6Gbs.
Feature updates
Initial release of the Installation and Cabling Guide for DS224C and
DS212C.
| Document update record |
51