Installation; Unpacking / Package Contents; Install Cautions And Warnings; Installation Location - Net2Edge LIB-306 Install Manual

Net2Edge

2. Installation

Unpacking / Package Contents

Carefully unpack the contents and verify that you have received these items in the packaging:

One LIB-306 NID

One country specific AC power cord (specific country variant chosen at time of order)
Save the packaging for future use.

Install Cautions and Warnings

Warning: Risk of Electrical Shock. Disconnect power before installing the LIB-306. Failure to
observe this warning could result in an electrical shock.
CAUTION Only qualified persons should install the LIB-306. Failure to observe this caution could
result in poor performance or damage to the equipment.
CAUTION Install the LIB-306 in an operating environment where the temperature range is from
-20°C to +55°C, with relative humidity of 5% to 85% non-condensing. Failure to observe this caution could
result in poor equipment performance.
CAUTION DO NOT install the LIB-306 in areas where strong electromagnetic fields (EMF) exist.
Failure to observe this caution could result in poor equipment performance and data corruption.
WARNING Disconnect power before installing and wiring the LIB-306 for power. Failure to observe
this warning could result in an electrical shock.
Attention: this product, like all electronic products, uses semiconductors that can be damaged by
ESD (electrostatic discarge). Always observe appropriate precautions when handling.

Installation Location

Deciding where to install the LIB-306 can greatly affect its performance. When selecting an installation
location, consider the following:

Install the LIB-306 in a fairly cool and dry place. See the "Specifications" section (page 7) and the
cautions below for the acceptable temperature and humidity ranges.

Install the LIB-306 where it will not be exposed to liquid.

Install the LIB-306 in a location free from strong electromagnetic field generators (such as motors).

Do not expose or subject the LIB-306 to excessive vibration, dust, or direct exposure to sunlight.

Leave at least 5 cm (1.97 in) of space around the LIB-306 for ventilation purposes.

Rack Mount Installation

The LIB-306 can be rack mounted in a 19" rack via optional rack mount Kit.
Install Guide Rev. D www.net2edge.com
LIB-306 Install Guide
Page 8 of 25