Net2Edge
Safety Warnings and Cautions
These products are not intended for use in life support products where failure of a product could reasonably be
expected to result in death or personal injury. Anyone using this product in such an application without express written
consent of an officer of Net2Edge does so at their own risk, and agrees to fully indemnify Net2Edge for any damages
that may result from such use or sale.
Attention: this product, like all electronic products, uses semiconductors that can be damaged by ESD
(electrostatic discarge). Always observe appropriate precautions when handling.
Warning: Potential for damage to equipment or personal injury.
Warning: Risk of Electrical Shock
Functional grounding point
Protective grounding point
Special considerations
LIB-306 Install Guide -
Record of Revisions
Rev
Date
th
A
12
December 2014
st
B
1
May 2015
th
C
25
September 2015
th
D
26
January 2017
Trademark notice
All trademarks and registered trademarks are the property of their respective owners. All other products or
service names used in this publication are for identification purposes only, and may be trademarks or
registered trademarks of their respective companies. All other trademarks or registered trademarks
mentioned herein are the property of their respective holders.
Copyright restrictions
© 2017, Net2Edge Ltd. All rights reserved. No part of this work may be reproduced or used in any form or
by any means (graphic, electronic, or mechanical) without written permission from Net2Edge.
Address comments on this product or manual to:
Net2Edge
Kulite House, Stroudley Road,
Basingstoke, RG24 8UG, UK.
Tel: +44 345 0130030
E-Mail:
support@net2edge.com
Install Guide Rev. D
Description of Changes
Initial release for LIB-306 software v 2.0.x.
Updated to v 2.1.3 which adds DDMI, HQoS, JSON, LLDP-MED, MEP BFD, MPLS-TP,
PFC, Traffic Test Loop, UDLD, and Y.1564 support.
Update the Rack Mount Installation information.
Re-Branded Manual
www.net2edge.com
LIB-306 Install Guide
Page 2 of 25
Need help?
Do you have a question about the LIB-306 and is the answer not in the manual?