How To Chop - Hitachi FPR1 Manual

How to use your food processor
Read all safety instructions before using the food processor for the first time.

How To Chop

Place the Bowl over the Center Post in the Base with the Handle at the left.
1.
Turn the Bowl towards the right until it drops down into place. Snap the Bowl
in so that the Handle lines up straight over the control panel; be sure it locks
into place (A).
2.
Grasp the Chopping Blade by its center shaft and slide it down onto the Center
Post.(B)
Place the Cover onto the Bowl so that the Food Chute is just to the right of the
3.
Bowl Handle.
4. Twist the Food Chute/Cover toward LOCK until you hear it click into place (C).
Plug the cord into an electrical outlet. Use the Food Guide to help you Prepare
5.
food for chopping/mincing/mixing and crumbing.
Press Pulse (or ON for continuous operation). When pulsing, hold the Pulse
6.
position for about 2-3 seconds: check results; repeat for desired consistency. It
is better to use several short operations rather than a single long one unless
mixing ingredients that require longer processing times.
After processing food, release the Pulse, or if you were using continuous ON,
7.
press OFF. Allow the Disc to stop rotating.
Twist the food. Chute/Cover towards UNLOCK to remove the Cover.
8.
Grasp the Chopping Blade by its shaft and remove. Unlock the Bowl by turning
9.
the Handle to the left, and Lift the Bowl off. Empty the processed food.
Please note warm foods and liquids can be processed in the bowl.
This product is NOT suitable for processing boiling liquids.
Be sure to process small amounts of liquids-2 cups or less at a time.
Larger amounts may leak from the Bowl.
-5-
(A)
(B)
( C )