Displaying And Maintaining Cpos Interfaces - H3C SR6600 Configuration Manual

Step
4. Create a 622 Mbps channel
and enter its view.
5. Configure the 622 Mbps
channel to operate in
concatenated mode.
Channelizing a 622 Mbps channel into 155 Mbps channels on a 2.5 Gbps CPOS interface
Step
1. Enter system view.
2. Enter 2.5 Gbps CPOS
interface view.
3. Configure the interface to
operate in channelized
mode.
4. Create a 622 Mbps channel
and enter its view.
5. Configure the 622 Mbps
channel to operate in
channelized mode.
6. Create a 155 Mbps channel
and enter its view.
7. (Optional.) Configure the
155 Mbps channel to
operate in concatenated
mode.

Displaying and maintaining CPOS interfaces

Execute display commands in any view and reset commands in user view.
Command
oc-12 oc-12-number
using oc-12c
Command
system-view
controller cpos interface-number
•
using oc-48
•
undo using
oc-12 oc-12-number
•
using oc-12
•
undo using
oc-3 oc-3-number
using oc-3c
44
Remarks
By default, no 622 Mbps channels
exist on a 2.5 Gbps CPOS
interface.
You can create up to four 622
Mbps channels on a 2.5 Gbps
CPOS interface.
By default, a 622 Mbps channel
operates in channelized mode.
When you place a 622 Mbps
channel in concatenated mode, a
622 Mbps POS interface is
created automatically for the
channel.
Remarks
N/A
N/A
By default, a 2.5 Gbps CPOS
interface operates in channelized
mode.
By default, no 622 Mbps channels
exist on a 2.5 Gbps CPOS
interface.
By default, a 622 Mbps channel
operates in channelized mode.
By default, no 155 Mbps channels
exist on a 622 Mbps channel.
You can create up to four 155
Mbps channels on a 622 Mbps
channel.
A 155 Mbps channel created on a
2.5 Gbps CPOS interface can only
operate in concatenated mode.
When you create a 155 Mbps
channel, the system sets its
operating mode to concatenated
automatically.
When you place a 155 Mbps
channel in concatenated mode, a
155 Mbps POS channel interface
is created automatically for the
channel.