Displaying And Maintaining T3 Interfaces - H3C SR6600 Configuration Manual

Step
12. Return to system view.
13. Enter synchronous serial
interface view.
14. Set the CRC mode.

Displaying and maintaining T3 interfaces

Execute display commands in any view and reset commands in user view.
Task
Display T3 interface information.
Display the configuration and state of a serial
interface formed on a T3 interface.
Clear statistics for T3 interfaces.
Command
quit
interface serial number/0:0
crc { 16 | 32 | none }
Command
display controller t3 [ interface-number ]
display interface serial interface-number
reset counters controller t3 [ interface-number ]
27
Remarks
N/A
Make sure the synchronous serial
interface is the one created for the
T3 interface.
The default is 16-bit CRC.