Philips HP6542 User Manual page 10

EnglisH
10
using the exfoliation brush
- You can use the exfoliation brush dry or wet to remove dead skin
cells gently and thoroughly. Make gentle circular movements with the
exfoliation brush for a soft exfoliating effect. This helps to prevent
ingrown hairs and gives you smooth, soft and fresh-looking skin.
- Brush your skin with the exfoliation brush one day before and two
days after epilating. After this, use it 2-3 times a week. Scrub your legs
with gentle, circular movements, starting at the ankles.
Note: When you use the exfoliation brush on dry skin, do not use exfoliating
creams, gels or foams.
Tip: To prevent dry skin in general, moisturise your skin daily with your
preferred moisturising cream.
Do not use the exfoliation brush immediately after epilation, as this may
intensify possible skin irritation caused by the epilator.
Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
Always keep the appliance and the adapter dry. Never rinse them under
the tap or immerse them in water.
If necessary, clean the adapter with the cleaning brush or a dry cloth.
Cleaning the appliance
1 Switch off and unplug the appliance.
2 Pull the sensitive area cap off the epilating head.
3 Push the epilating head to the right (1) and remove it from the
appliance (2).
Note: Never try to detach the epilating discs from the epilating head.