Yaesu FT-2000 Operating Manual page 31

TX
This indicator appears during transmission on the Main
band (VFO-A) frequency.
BUSY
This indicator appears whenever the Main band (VFO-
A) receiver squelch is open. If this indicator is not show-
ing, and reception seems to have been lost on the Main
receiver for no apparent reason, check the position of
the SQL knob and rotate it fully counter-clockwise to
restore reception.
Main VFO-A Frequency Display
This is the Main band (VFO-A) frequency display.
A :
When setting the Menu items, the Menu item num-
ber and Menu group name will appear in this area
during setup.
When setting the CTCSS frequency for Encoding
or Tone Squelch operation, the current tone infor-
mation will appear in this area during setup.
LOCK
This indicator appears when the Main Tuning Dial knob
is locked.
FAST
This indicator appears when the Main Tuning Dial
knob's tuning rate is selected to fast.
MIC EQ
This indicator appears whenever the Three-Band Para-
metric Microphone Equalizer is activated via the Menu.
Tuning Offset Indicator
This is a tuning scale that, as configured from the fac-
tory, provides a visual CW tuning indication of the in-
coming signal's offset from your transceiver's CW car-
rier frequency, as programmed by the relative clarifier
offset, or the peak position of the VRF/µ-TUNE filter.
FT-2000 O
D
ISPLAY
M
I
NDICATIONS C
REC
This indicator appears while the voice recorder is re-
cording the receiver audio, and/or the memory is re-
cording your CW or voice message.
PLAY
This indicator appears while the voice recorder is play-
ing back the recorded audio, and/or the memory is play-
ing back the recorded CW or voice message.
Multi-Display Window
This window displays either the Clarifier offset or
Memory Channel Number.
A :
During FM operation, the Repeater Shift will be
indicated in this window. A Negative frequency shift
will be indicated by "–" while a Positive frequency
shift will be indicated by "+."
When setting the Menu items, the current setting
will appear in this area.
When setting the CTCSS frequency for Encoding
or Tone Squelch operation, the current repeater shift
direction will appear in this area.
CLAR
This indicator appears whenever the Clarifier function
is activated.
MR
This indicator appears when the FT-2000 is in the
Memory Recall mode.
MT
This indicator appears when the FT-2000 is in the
Memory Tune mode to indicate that the memory con-
tents have been temporarily changed.
Page 29