Yaesu FT-2000 Operating Manual page 26

F P
RONT ANEL
M A Switch
Pressing this button momentarily displays the contents
of the currently-selected memory channel for three sec-
onds.
Holding this button in for 2 seconds copies the data
from the currently-selected memory to the Main VFO
(VFO-A), as two beeps sound. Previous data in the
Main VFO will be overwritten.
A M Switch
Pressing and holding in this key for 1/2 second (until
the double beep) copies the current operating data from
the Main band (VFO-A) into the currently selected
memory channel, overwriting any previous data stored
there.
Also, pressing and holding in this button after recall-
ing a memory, without first retuning, causes the memory
channel to be "masked," and repeating the process re-
stores the masked memory.
Page 24
C
ONTROLS
& S
WITCHES
CLAR
+
MENU Switch
This button is used for gaining access to the Menu sys-
tem, for configuring various transceiver characteris-
tics. Menu operation is described in detail, in this
manual, beginning on page 108.
I N :
Pressing this button momentarily activates the Menu,
and the Menu items will appear on the display; once
you are finished, you must press and hold in the
[ MENU ] button for two seconds to save any configu-
ration changes (momentarily pressing the [ MENU ]
button to exit will not save the changes).
BAND Keys
These keys allow one-touch selection of the desired
Amateur band (1.8 ~ 50 MHz).
What's more, these keys may be used for direct entry
of a desired operating frequency during VFO opera-
tion.
FT-2000 O M