Specify the Number of Copy Sets
Log In/Out
Enter the desired number of copy sets (1 to
999) with the numeric keys.
If you make a mistake when entering values, press
●
enter the correct values.
➡
The number of copy sets you specify is displayed
on the right side of the Regular Copy Basic
Features screen.
To cancel, interrupt, continue copying, or confi rm prints
●
To cancel copying
➡
Press
.
To interrupt copying
●
➡
Press [Interrupt].
See "Interrupt Mode, " in the Copying and Mail Box Guide.
Start Copying
Log In/Out
Press
.
When copying is complete, remove your
●
originals.
If the following screen is displayed, follow the
●
instructions on the screen and press
each original. When scanning of the originals is
complete, press [Done].
If Department ID Management is set, press
●
(Log In/Out).
●
To make another copy while
printing
Press [Done].
➡
➡
Place the next original.
➡
Press
.
Making a Copy
once for
9