Canon imagePRESS C1+ Easy Operation Manual page 31

Item
Cover/Sheet Insertion
Maximum Number of Sheet Insertions,
Chapter Pages, and Tab Paper
Tab Paper Creation
Image Shift Width when Copying on Tabs of
Tab Paper
Mode Memory
Maximum Combinations of Copy Modes
Secure Watermark
Size of Text
Character/Background Contrast Adjustment
Relative Contrast Value
Standard Values Settings
Latent String Density
Page/Copy Set Numbering
Position of Page Numbers
Page Number Print Size
Position of Copy Set Numbers
Copy Set Number Size
Watermark/Print Date
Position of Watermark/Date
Watermark Print Size
Date Print Size
*2 When Copy Set Numbering Options in System Settings (from Additional Functions) is set to On, the possible print sizes are [Small]: 10.5 point, [Medium]: 12 point, and
[Large]: 14 point. (See Chapter 6, "System Manager Settings, " in the Reference Guide.)
Limit Value
100 sheets total
0 mm to 25 mm
9
36 pt., 54 pt., 72 pt.
*1
-7 to +7
0 to 64
0 to 36
Top left, centre top, top right, bottom left,
centre bottom, and bottom right
Also adjustable -8 mm to +8 mm both
vertically and horizontally
10.5 point, 12.0 point, 14.0 point
Top left, top right, bottom left, Full Surface,
and Numbers in 5 Locations
Also adjustable -8 mm to +8 mm both
vertically and horizontally (excepting Full
Surface and Numbers in 5 Locations)
12.0 pt., 24.0 pt., 36.0 pt.
Top left, centre top, top right, bottom left,
centre bottom, and bottom right
Also adjustable -8 mm to +8 mm both
vertically and horizontally
36.0 point, 54.0 point, 72.0 point
10.5 point, 12.0 point, 14.0 point
Setting Limits for the Various Copying Options
Remarks
See p. 16, Copying and Mail Box Guide Chapter 4
Copying and Mail Box Guide Chapter 4
Specify in 1 mm increments
See p. 22, Copying and Mail Box Guide Chapter 5
See p. 23, Copying and Mail Box Guide Chapter 4
Specify in 1 increments
Specify in 4 increments
Specify in 1 increments
See p. 23, Copying and Mail Box Guide Chapter 4
Specify in 1 mm increments
Specify in 1 mm increments
*2
Copying and Mail Box Guide Chapter 4
Specify in 1 mm increments
31