European Directives And Standards For The Machine Builder; American Directives And Standards For The Machine Builder; Asian Directives And Standards For The Machine Builder - Danaher SERVOSTAR 300 Series Product Manual

Digital servo amplifier
Table of Contents

Advertisement

Standards
3.2

European Directives and Standards for the machine builder

Servo amplifiers are components that are intended to be incorporated into electrical plant
and machines for industrial use. When the servo amplifiers are built into machines or
plant, the amplifier must not be used until it has been established that the machine or
equipment fulfills the requirements of the
l
l
l
Standards to be applied for conformance with the EC Machinery Directive (98/37/EG)
EN 60204-1 (Safety and Electrical Equipment in Machines)
EN 12100
The manufacturer of the machine must generate a hazard analysis for the machine,
and must implement appropriate measures to ensure that unforeseen movements
cannot cause injury or damage to any person or property.
Standards to be applied for conformance with the Low Voltage Directive (2006/95/EC):
EN 60204-1
EN 60439-1
Standards to be applied for conformance with the EMC Directive (2004/108/EC):
EN 61000-6-1 / 2 (Interference Immunity in Residential & Industrial Areas)
EN 61000-6-3 / 4 (Interference Generation in Residential & Industrial Areas)
The manufacturer of the machine/plant is responsible for ensuring that it meets the limits
required by the EMC regulations. Advice on the correct installation for EMC (such as
shielding, grounding, treatment of connectors and cable layout) can be found in this docu-
mentation.
The machine/plant manufacturer must check whether other standards or EC
Directives must be applied to the machine/plant.
3.3

American Directives and Standards for the machine builder

Chapter in process
3.4

Asian Directives and Standards for the machine builder

Chapter in process
12
EC Machinery Directive
EC EMC Directive
EC Low Voltage Directive
(Safety of Machines)
(Safety and Electrical Equipment in Machines)
(Low-voltage switchgear and controlgear assemblies)
10/2007
(98/37/EG)
(2004/108/EG)
(2006/95/EG)
SERVOSTAR
Danaher Motion
®
300 Product Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents