Installation; Installation Of Board And Rear Panel - Sony BKSM-T103 Installation Manual

2-1. Installation of Board and Rear Panel

n
To avoid shock hazard, be sure to turn the power of the
DSM-T1/M1 off and unplug the appliance from the outlet
before installing.
Installation position
The APR-30 board can be installed in either "1" (IN 1)
side or "2" (IN 2) side of the DSM-T1/M1.
The installation position of the ANALOG IN rear panel
depends on the APR-30 board position.
When the APR-30 board is installed in "1" side, install the
ANALOG IN rear panel to the "1" side.
Similarly, when the APR-30 board is installed in "2" side,
install the ANALOG IN rear panel to the "2" side.
DSM-T1/M1
IN 2 side
IN 1 side
BKSM-T103
Section 2

Installation

APR-30 board
IN 2 side
IN 1 side
Preparations
(1) Turn the power of the DSM-T1/M1 off, then unplug
the appliance from the outlet.
(2) Remove the six screws, and remove the top panel from
the DSM-T1/M1.
Top panel
DSM-T1/M1
B 4x6
2-1 (E)