Linksys 10/100 LAN Card 10/100 User Manual page 47

14. Highlight Save Parameters and Load Driver. Press Enter.
15. Your PC will examine the network. This may take a few minutes.
16. You may be prompted several times for a network on which to bind IPX
to LNE100TX_1. Accept the default numbers if you are not sure which
values to assign.
17. When asked Do you want to select an additional Network driver?, high-
light No and press Enter.
18. Press ESC a few times to exit the program.
The loading and binding are complete. The server is ready.
44
Linksys EtherFast Series