Linksys 10/100 LAN Card 10/100 User Manual page 46

EtherFast ® 10/100 LAN Cards
7. Add the LOAD and BIND statements to your server's AUTOEXEC.NCF
file so that the LAN driver loads automatically each time your server is
started up.
The loading and binding is complete. The server is ready.
Installing a 5.x Server
1. On the PC in which you installed the EtherFast card, simultaneously press
CTRL and ESC.
2. When the next screen pops up, select the number for System Console
and press Enter.
3. In the System Console prompt, load NWCONFIG by typing nwconfig
and hitting Enter.
4. Highlight Driver Options. Press Enter.
5. Highlight Configure network drivers. Press Enter.
6. Highlight Select a driver. Press Enter.
7. Press INS to Install an unlisted driver.
8. Press F3 to Specify a different path.
9. In the Specify a directory path box, type A:\NETWARE\SERVER\NW50
and press Enter.
10. In the next box, ensure that LNE100TX.LAN | Linksys LNE100TX Fast
Ethernet Driver is highlighted. Press Enter.
11. You will be asked Do you want to copy driver LNE100TX.LAN. Highlight
Yes, then press Enter.
12. Files will begin copying to your hard drive. Afterwards, a Protocol and
Parameter screen will pop up. Highlight Select/Modify driver parame-
ters and protocol. Press Enter.
13. Arrow down the list that appears and choose which protocols you want to
install. Press F10 to save.
43