Ceramic Refractory Installation - Vermont Castings Chateau DVT44 Installation Instructions And Homeowner's Manual

Direct vent gas fireplace
Table of Contents

Advertisement

Chateau™
To Remove
Outer Ring, Cut
Here (6 Places)
DVT38
Use tin snips to cut
along inner slots to
make 3" restrictor
plate. (Refer to
Page 12)
FP1810
Fig. 35 Restrictor plate location.
Remove Screws (3)
FP1810
restrictor plate_2
6/07 djt
Rear Log
Bracket
Fig. 36 Remove rear log bracket.
1 2
3
4
Fig. 37 Fresh air restrictor plate adjustment.
6. Replace the rear lower and upper refractory, side
refractory, fettle, andiron, logs and glass.
22
Flue Opening
Restrictor
Plate
Sheet Metal
Screws
DVT44 (6³⁄₄" as Shown)
Use tin snips to cut
along slots to make 4¹⁄₂"
(114mm) restrictor plate.
(Refer to Page 12)
DVT38
Use tin snips to cut along
outer slots to make 4¹⁄₂"
(114 mm) restrictor plate.
(Refer to Page 17, Fig. 27)
FP1556
Fresh Air
Restrictor
FP1556
Plate
remove rear
log bracket
3/05 djt
FP1557
FP1558
fresh restrictor
plate adjustment
3/05 djt

Ceramic Refractory Installation

The ceramic refractories are fragile and
should be handled with care. Due to the
size of the refractories, an assistant may
be helpful.
NOTE: The ceramic refractories are shipped sepa-
rate from the unit but MUST BE installed.
Refer to Ceramic Refractory Kit listed below.
Appliance
Kit Model
DVT38
DVT38CRR
DVT38
DVT38CRL
DVT38
DVT38CRH
DVT44
DVT44CRR
DVT44
DVT44CRL
DVT44
DVT44CRH
Left Side
Rear Refractory
Refractory
Upper
FP1365a
Fig. 38 DVT44 ceramic refractory panels. (Limestone refrac-
tory shown)
1. Using a Phillips or Robertson screwdriver, unfasten
the two (2) screws holding the fettle to the burner
assembly. With a wrench, remove the front burner
tube by unfastening the two (2) nuts that secure the
burner tube to the front of the burner assembly.
2. Using a Phillips or Robertson screwdriver, remove
the heat shield located toward the front top of the fire
box by unfastening the five (5) screws that secure
the heat shield in place. (Fig. 39)
Fig. 39 Remove five (5) screws securing heat shield in place.
Description
Colonial Red
Limestone
Herringbone
Colonial Red
Limestone
Herringbone
Right Side
Refractory
Rear Brick Lower
(Colonial Red Only)
FP1365
DVT44
refractory panels
5/23/03 djt
Return Flange
Remove
Screws (5)
FP1369
20011956
FP1369
heat shield/insulation
assembly

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Chateau dvt38

Table of Contents