Disassembly And Disposal - Kostal PIKO 10 Operating Manual

Appendix
1 2 3

12.4 Disassembly and disposal

To disassemble the inverter, proceed as follows:
De-energise the inverter.
1.
Ch. 4.3
Open the inverter cover.
2.
Loosen terminals and cable glands.
3.
Remove all DC and AC lines.
4.
Close the inverter cover.
5.
Loosen the screw underneath the inverter.
6.
Lift the inverter from the wall mount.
7.
Dismantle the wall mount.
8.
Proper disposal
Electronic equipment labelled with a dustbin with a
line through it, may not be disposed of with household
waste. This equipment can be handed in to waste
collection points free of charge.
Find out about the local requirements for the separate
collection of electrical and electronic equipment in your
country.
© 2019 KOSTAL Solar Electric GmbH
4 5 6 7 8 9 10 11
DANGER
RISK OF DEATH DUE TO
ELECTRICAL SHOCK AND
DISCHARGE!
De-energise the device, secure it
against being restarted and wait
five minutes so that the capacitors
can discharge.
12 12
Ch. 4.3
153