Chapter 1: Overview; Table 1-1: Model Numbers And Ordering Options - Aerotech ABL1500Z Hardware Manual

ABL1500Z Hardware Manual

Chapter 1: Overview

N O T E : Aerotech continually improves its product offerings; listed options may be superseded at any
time. All drawings and illustrations are for reference only and were complete and accurate as of this
manual's release. Refer to www.aerotech.com for the most up-to-date information.
Table 1-1: Model Numbers and Ordering Options
ABL1500Z Series Linear Air-Bearing Stage
-050 50 mm travel
-100 100 mm travel
-150 150 mm travel
-200 200 mm travel
Feedback (Required)
-E1 Incremental linear encoder, 1 Vpp amplified sine output
-E2 Incremental linear encoder, 0.1 µm TTL line driver output
-E3 High-accuracy incremental linear encoder, 1 Vpp amplified sine output
Cable Management (Required)
-CMS1 Single axis cable management system
-CMS2 Cable management system for ZT assembly
Metrology (Required)
-PL1 Metrology, uncalibrated with performance plots
-PL2 Metrology, calibrated (HALAR) with performance plots
Accessories (to be ordered as separate line item)
ALIGN-NPA Non-precision XY assembly
XY assembly; 10 arc sec orthogonality. Alignment to within 7 microns orthogonality for
ALIGN-PA10
short travel stages.
XY assembly; 5 arc sec orthogonality. Alignment to within 3 microns orthogonality for
ALIGN-PA5
short travel stages.
ABF Air-bearing filtration kit
www.aerotech.com Chapter 1
Overview
11