Immobilizerdevice Enabled Indicator Led; Operation - Gilera Runner 125VX Manual

Table of Contents

Advertisement

WARNING
IT IS ADVISED THAT THE "CODE CARD" AND THE KEY WITH THE BROWN GRIP
BE KEPT IN A SAFE PLACE (NOT ON THE VEHICLE).

Immobilizerdevice enabled indicator led (01_12)

The functioning of the «PIAGGIO IMMOBILIZER» system is shown by the flashing of
the appropriate warning light «F», shown in the «Dashboard» section. In order to re-
duce battery discharge, the indicator LED turns off automatically after 48 hours of
uninterrupted functioning. Should the signal led system break down in its flashing
01_11
function, give information about the type of problem to an Authorised Piaggio-Gilera
Service Centre.

Operation

Every time the starter key is removed in the "OFF" or "LOCK" position, the safety
system activates the immobilizer system. Turning the key to "ON" disables the engine
lock, provided that the safety system recognises the code transmitted by the key. If
the code is not recognised, turn the key first to "OFF" and then to "ON"; if the block
remains try again with the other brown key. If it is still not possible to start the engine
it is absolutely necessary to turn to an Authorised Piaggio-Gilera Service Centre
that has the equipment necessary for diagnosis and repair of the system.
01_12
When additional keys are required, please note that data storage (up to 3 keys max.)
must be done on all keys, both new ones and existing ones. Turn directly to an Au-
thorised Piaggio-Gilera Service Centre, bringing the brown key and all the red ones.
The codes of keys not submitted for the new storage procedure are deleted from the
memory. Any lost keys will therefore not be enabled to start the engine.
WARNING
WARNING
EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED BY
THE SYSTEM CONTROL UNIT.
VIOLENT SHOCKS MAY AFFECT THE ELECTRONIC COMPONENTS OF THE
KEY.
16

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Runner 200vxr

Table of Contents