Bosch AEC‑AMC2‑UL01 Installation Manual page 17

AMC2 enclosure with 1
DIN rail
12 V mode operation using two batteries
1.
2.
3.
4.
5.
6.
Bosch Security Systems B.V.
Set the switch of the power supply unit to 12 V.
Connect B12 to the power supply interface labeled BAT.
Connect B7b (black) to the rechargeable negative (-)
terminal of the battery.
Connect B7a (red) to the rechargeable positive (+) terminal
of the battery.
Connect B8b (black) to the second rechargeable negative
(-) terminal.
Connect B8a (red) to the second rechargeable positive (+)
terminal of the battery.
Connections | en
2020-07 | V04 | F.01U.330.018
17