Table of Contents
Advertisement
10
en | Mounting the enclosure
2
Mounting the enclosure
The enclosure is designed to be mounted on a wall.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Tighten all screws.
–
86,5 mm
3,406 in
Figure 2.1: Dimensions of the enclosure
2020-07 | V04 | F.01U.330.018
Open the door lock of the enclosure with the provided key.
Hold the enclosure at the desired position against the wall.
Mark the mounting holes on the wall with a pencil.
Put the enclosure aside.
Drill the holes at the points that you previously marked on
the wall.
Insert the screw anchors in the drilled holes.
Drive the screws halfway into the top and bottom left screw
anchors.
Hang the enclosure on the wall, according to the position of
the screw anchors.
Drive the third screw into the anchor on the bottom right.
The enclosure is installed.
401 mm
15,787 in
200,5 mm
7,894 in
352,5 mm
13,878 in
AMC2 enclosure with 1
0,197 in
10 mm
0,394 in
318 mm
12,52 in
10 mm
0,394 in
Bosch Security Systems B.V.
DIN rail
5 mm
5 mm
0,197 in
Advertisement
Table of Contents
