Table of Contents
Advertisement
16
en | Connections
3.3.1
12 V mode operation
Notice!
Make sure that the power supply has the correct output voltage
(12 V).
B7a
Figure 3.3: 12 V mode with one battery (left); 12 V mode with two batteries
(right)
12 V mode operation using one battery
1.
2.
3.
4.
5.
6.
2020-07 | V04 | F.01U.330.018
B12
B7b
+
-
Set the switch of the power supply unit to 12 V.
Connect B12 to the power supply interface labeled BAT.
Connect B7b (black) to the rechargeable negative (-)
terminal of the battery.
Connect B7a (red) to the rechargeable positive (+) terminal
of the battery.
Attach the bracket to the back of the housing next to the
batteries.
Attach the connectors B8a and B8b to the bracket.
B8a
B7a
B8b
AMC2 enclosure with 1
B12
B7b
B8a
+
-
+
Bosch Security Systems B.V.
DIN rail
B8b
-
Advertisement
Table of Contents
